Particle Monitor One, Руководство пользователя

Страница: 1 / 45

Monitor One datasheet
The pictures in this preliminary datasheet are of a pre-release unit. The production units will be a
different color, and may have other minor differences.
The Monitor One is an off-the-shelf complete gateway design, like the Tracker One. The Monitor
One is in a larger IP67 waterproof enclosure with room inside for an expansion card and additional
connectors, allowing it to be used in more custom scenarios than the Tracker One.
Ready to go with rugged IP67-rated enclosure with room inside for an expansion card.
Flexible power supply to easily add asset tracking to most devices with a 6 - 30 VDC power
input and a large 18650 LiPo battery pack.
Internal or external antennas for cellular and GNSS.
Temperature sensors on the carrier board, and also a battery pack temperature sensor.
Expansion card connector to allow for custom application specific hardware.
RGB LED for system status, and two user RGB LEDs for your own use, visible from outside the
enclosure.
User button, waterproof and accessible from outside the enclosure.
Particle gateway device like the Monitor One and Tracker One are designed to be used off-the-
shelf to interface to other devices and sensors using standard protocols such as CAN bus, I2C, and
serial.
For information on setting up a Monitor One Developer Edition, see the Monitor One Quickstart .