St. Bernard Installation Instructions
Page 11 of 19
Final Assembly
Step 1: Make sure all the cables and devices are properly connected.
A.
Inspect every cable connection and ensure that no connections are loose.
B.
Use cable ties or other wire management to neatly bundle the cables. Pack the cables neatly
inside the bottom half of the case.
Ensure that the antenna
cables are not excessively bent (1/2”
minimum bend radius). For the St. Bernard G, ensure that no antenna cables are running
across the top of the router.
Figure 10: Fully Connected 9in1 St. Bernard A with Cradlepoint IBR1700 Router
