Mounting Options
Wall Mounting Instructions
Step 1.
Step 1.
Step 2.
Step 2.
For best performance it’s important that the antenna be mounted at least 2 feet away from other
objects with a clear view of the horizon in as many directions as possible. Non-penetrating roof
mounts allow the antenna to be moved away from other objects and a mast height of about 6 ft.
puts the mounting hardware and RF connections near eye level during installation. Select a mounting
location away from air conditioning units and other large metal objects.
Mark the position of the screw holes on the wall to mount the antenna on the wall. (Figure 2)
Drill 0.2” holes on the wall and install the anchors on the wall. (Figure 3)
Select one of the mounting option below, depending on your use.
-
Wall Mounting
(Included)
Using the 2 anchors and included screws the antenna can be mounted on
a panel or a wall.
-
Mast Mounting
(Included)
Using the included clamp saddle, v clamp bolt, and nuts and washers you
can mount the Labrador on a pole for better isolation.
FIGURE 2
FIGURE 3
