background image

 
 

Battery Operation and Safety Guidelines 

A.

 

To manually power ON/OFF, press and hold the power button (located on the top of the unit) for 3 
seconds. All LED lights/display should turn ON/OFF. 

B.

 

Recharging the battery pack can be done with the included 48W Charging Adapter or with a Type-
C PD Charger with at least 45W of power and up to 65W maximum. 

C.

 

While plugged in and charging, the battery pack will allow pass-through charging to continue 
powering any devices that are plugged in to the battery pack. 

D.

 

Warning: if the battery pack exceeds a safe operating temperature due to insufficient ventilation or 
a high-temperature environment, the unit will automatically shut OFF. 

E.

 

Keep out of reach of children. 

F.

 

The product may become uncomfortable warm, reaching 100°F (40°C) under extended, high-power 
usage. While using the product, make sure to keep it away from materials that may be affected by 
high temperatures. 

G.

 

Hold on carefully when inserting or removing a cable. Make sure not to force or bend cables when 
inserting them into the charging ports. 

H.

 

Avoid inserting any foreign objects into the ports. 

I.

 

Do not attempt to open, alter, or modify the unit. 

J.

 

Do not in temperatures over 100°F (40°C). 

K.

 

Do not expose the product to wet conditions such as water, rain, or snow. 

L.

 

Failure to follow these safety guidelines may cause personal injury and/or property damage to the 
product. It may also void the product warranty. 

 

 

Содержание BLOODHOUND R19D


















Отзывы: