Bernese Mountain Dog G2
Page 16 of 17
Battery Operation and Safety Guidelines
A.
To manually power ON/OFF, press and hold the power button (located on the top of the unit) for 3
seconds. All LED lights/display should turn ON/OFF.
B.
Recharging the battery pack can be done with the a Type-C PD Charger with at least 45W of power
and up to 65W maximum.
C.
While plugged in and charging, the battery pack will allow pass-through charging to continue
powering any devices that are plugged in to the battery pack.
D.
Warning: if the battery pack exceeds a safe operating temperature due to insufficient ventilation or
a high-temperature environment, the unit will automatically shut OFF.
E.
Keep out of reach of children.
F.
The product may become uncomfortable warm, reaching 100°F (40°C) under extended, high-power
usage. While using the product, make sure to keep it away from materials that may be affected by
high temperatures.
G.
Hold on carefully when inserting or removing a cable. Make sure not to force or bend cables when
inserting them into the charging ports.
H.
Avoid inserting any foreign objects into the ports.
I.
Do not attempt to open, alter, or modify the unit.
J.
Do not in temperatures over 100°F (40°C).
K.
Do not expose the product to wet conditions such as water, rain, or snow.
L.
Failure to follow these safety guidelines may cause personal injury and/or property damage to the
product. It may also void the product warranty.
