PARRY PGF600G, Инструкция по эксплуатации продукта

Страница: 8 / 20

Parry -British Built for Purpose
IN205-4
6
Operating Instructions
FOR FITTING INSTRUCTIONS SEE INSTALLATION SECTION.
ALL GRIDDLES ARE FITTED WITH FLAME FAILURE DEVICE FOR SAFETY AND SPARK IGNITION
FOR EASE OF LIGHTING
TO LIGHT BURNER:
Turn knob to
*
position
Push knob in and ignite gas by pressing ignition button to left of the on/off knob.
Keep ON/OFF knob pressed in for 15-20 seconds. Check gas is lit by looking through the
gap between plate and the front panel of the appliance.
Release ON/OFF knob, gas should stay lit, if gas goes out repeat (2) the burner is now on.
If the unit fails to light within 1 minute, abort the lighting process for at least 2 minutes to
allow gas to disperse.
Turn knob anti-clockwise to obtain main gas . The lowest setting has been set at the
factory and sealed. This must not be adjusted by user.
To turn burner off, turn knob in a clockwise direction all the way round to
•
We advise that the appliance should not be left unattended when switched on.
The appliances are designed for professional use by qualified people only.
There are no user serviceable parts.
It is recommended that Griddles be run on full gas after ignition for 10 minutes, then adjusted
as necessary to obtain correct cooking temperature.
To remove any residue, use a scraper several times a day after cooking. Scaling will result if
this is not done. Empty the fat drawer and clean every day.