PARRY GB6, Инструкция по эксплуатации продукта

Страница: 13 / 25

Parry -British Built for Purpose
IN258-3
11
Replacement Parts
For Gas Safe Engineers only
HOB TAP - Remove pan supports, pull off control knobs and unclip fascia panel.
Disconnect burner supply tube and thermocouple. Undo the 2 screws securing the tap to
the rail. Check sealing washer and replace if necessary. Assemble in reverse order.
HOB BURNER/THERMOCOUPLE – Remove Pan Supports and Burner caps. Remove the solid
top tray.
Disconnect thermocouple from rear of tap. Undo locknut on burner mounting channel.
Assemble in reverse order.
OVEN THERMOSTAT - Proceed as for hob tap. Slide thermostat phial from housing inside
oven. Remove through hole in the top of the oven on right hand side. Assemble in reverse
order.
OVEN THERMOCOUPLE - Remove the bottom oven tray. Inside the oven disconnect the
thermocouple from the extension piece. Undo locknut holding thermocouple to oven
burner. Assemble in reverse order. Ensure locknut is securely tightened.
OVEN BURNER/IGNITON - Remove oven base. Disconnect oven supply tube, H.T. lead and
thermocouple. Burner is held in by 2 screws. Piezo spark generator is secured by a locknut.
Electrode secured to burner bracket by centre screw.