Parrot ANAFI Thermal, Руководство пользователя

Страница: 19 / 81

User Guide v3.0 –
published on May 14, 2019
19
1. Charge the battery using the enclosed USB-A to USB-C cable and a USB-A power
adapter. Charging times depend on the supply capacity of the adapter. Refer to
the
“ Battery charging ”
section of this guide for additional information. Parrot
recommends you always run a full charge of your smart battery before flying
Thermal
2. If you want to use the controller and enjoy the full Thermal experience,
charge Parrot Skycontroller 3.
3. Check that your flying zone is safe and clear.
4. To start the drone, place it on a flat horizontal surface and press the power
button.
5. a) If you use Parrot Skycontroller 3, unfold the central part of the controller to
power it on, wait for the steady dark blue light, then plug your device to the
controller using a USB cable. Parrot recommends you always fly
Thermal
with Parrot Skycontroller 3 and a device, for the best flight experience.
b) If you do not wish to use the controller, connect your device to the Wi-Fi
network of
Thermal, using the Wi-Fi settings card located inside the
drone’s carrying case - SSID format: AnafiThermal-xxxxx.
6. FreeFlight 6 runs automatically on your device and connects to Thermal
and to Parrot Skycontroller 3.
7. Check for controller and drone software updates.
8. Calibrate your Thermal, your Parrot Skycontroller 3, or both, if required,
following the instructions on the screen of your device.
9. Check that your flying zone is still safe and clear, and that no one (people, animal)
has approached or is approaching
Thermal.
10. Stay at least 2m (6ft) clear from the drone, press the button and enjoy the
flight!