Parrot Uncle F8290110V, Инструкция по установке и эксплуатации, Страница: 5 / 26

Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
FROM POWER SOURCE
AC 110- 120 VOLT 60Hz
3.5AMPS.
supplied with the
Use plastic wire nuts
fan
Insert the receiver into the moun�ng bracket with the flat side of the receiver
facing the ceiling.
Make the wire connec�on between the Fan and power supply.
Make sure all connec�ons are secured.
WARNING: To avoid possible electrical shock, be sure electricity is turned off
at the main fuse box before wiring.
Slide the canopy up to ceiling and align the keyhole slots on the canopy with the 2 preassembled screws on the hanger bracket.
Twist clockwise un�l it locks. Tighten two screws to fix the canopy securely.
Remove the canopy cover from the canopy (if a�ached).
Clip the canopy cover in to secure it onto the canopy.
Hang the fan into moun�ng bracket.
Aligh ball groove on hanger ball with ridge on hanger bracket.
Ensure hanger ball si�ng into hanger bracket correctly.
If fan doesnot sit properly,hold the downrod and twist it un�l fan has been secured into hanger bracket.
WARNING: Failure to aligh ball groove with ridge may result in serious injury.
ball groove Ridge
4
B
A
OK
NO
65
F8290110V
R E C E I V E R MOTOR
Ground wire
L
N
Red
White
6
INSERT
INSERT