Table of Contents
1.
Fan
/ Remote is not working
2.
Fan is noisy
3.
Fan Wobbles
4.
Light is not working
Please refer to the instruction sheet for detailed directions and descriptions of
installation steps
and requirements.
1.
FAN
/ REMOTE IS NOT WORKING
Ensure the remote is within the 6m
range of the receiver
To reset the remote control: 1) Turn o
ff p
ower to fan
using the wall switch or circuit breaker. 2) Remove ba eries from remote.
3) Wait 10 seconds. 4) R
ep
lace ba eries and tu
rn pow
er on
Check ba eries to
insure they are good and oriented correctly
Check to make sure the frequency switches (DIP Switches) from the remote to the receiver are set to the same frequency
Check the main
and branch circuit fuses or breakers
If using a Variab
le Spe
ed Wall Switch, ensure
it is
sp
eci
fic
ally designed for use with a ceiling fan.
Check the line wire connec ns to the fan and the
switch wire conn
e switch housing
per
the instru
ns
Su
pp
ort@
p
arrotuncle.com
2.
THE FAN IS NOISY
Make sure all motor housing screws are
tened
Make sure the screws that a
an blade to motor ar
t
Make sure the wire nut connectors are not ra
against each other or the interior wall of the switch housing
Allow 24-hour brea
k in peri
od. Most noises associated with the new fan may
disappear du
ring th
me
If using a ceiling light kit, make sure the glassware is secur
htly
Make sure there is a short dist
ance/gap
from the ceiling to the to
p
of the can
opy
. The cano
p
y
should not touch the ceiling!
Make sure your ceiling box is secure and that the rubber isolat
or pad
s are used between the moun
acket and outlet box
TROUBLESHOOTING GUIDE
Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F6298SN-EU
F6298NW-EU