7. Turn on the “LOW CUT” function of the transmitter as needed to significantly improve ambient low frequency
and wind noise
9. Adjust the volume control of the receiver to achieve the appropriate sound effect. OUT recording output
and PHONES headphone output are independent volume adjustment. In the standby interface, the display only
shows the volume level of the PHONES; the adjustment method is as below:
OUT recording output volume adjustment:
Press the SET button to adjust the volume with the button when the
OUT LEVEL character on the display flashes. Press the SET button again to exit and save the setting,
or automatically exit after 5 seconds and save the settings; usually the default volume is set at 0-4dB level
PHONES headphone output volume adjustment:
Press the SET button to adjust the volume with the button when
the “PHONES” character on the display flashes. Press the SET button gain to exit and save the setting,
automatically exit after 5 seconds and save the settings
8. The receiver can either be dual independednt output (ST) or mixed output (MIX) - optional. Using independent
output, the audio track can be processed later on
4
