background image

4.SAFETY INSTRUCTIONS

ALUMINIUM

Hotplate burner bodies.
Similar to paint cleaning above. Use a nylon brush to remove any cleaning materials, water or dirt from 
the hotplate burner bodies. After cleaning, wipe dry and refit to the hob ensuring they are correctly 
seated.
Check parts are reassembled correctly by lighting the burners and allowing to dry out.

PLASTIC

Control knobs.
Wipe with a cloth wrung out in hot soapy water.

STAINLESS STEEL

Cloth wrung out in hot soapy water.

IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety 
precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make 
sure you understand all instructions and warnings. Keep the manual in a safe place for future reference, along 
with the completed warranty card and purchase receipt. If you sell or transfer ownership of this product, pass on 
these instructions to the new owner.

Always follow basic safety precautions and accident prevention measures when using an electrical 
appliance, including the following:

       
instructions in this manual and all applicable rules and regulations. Any electrical work required for installation 
must be carried out by a licensed electrician. 
     !
any work on the electrical section of the appliance, or any maintenance work or repairs, the appliance must be 
disconnected from the mains. If accessible, always switch off the cooktop at the wall before cleaning the 
appliance. Failure to follow this advice may result in death or electric shock.
" # $   %
when the equipment is in use. Do not touch the cooktop components (base, burners, caps, enamelled trivets) 
when hot. We recommend using oven gloves when handling cookware.
&'**    +
a fire, never try to extinguish it with water. Switch off the burner and cover the flame(s) with a lid or fire blanket.
; <     <
aerosols near the cooktop when it is in use. Do not modify the appliance. Failure to follow this advice may result 
in death or serious injury.

GENERAL USAGE CONDITIONS AND RESTRICTIONS

<       =*
the warranty. The cooktop can be built into a standard kitchen cabinet or housing unit.
+ >    $ *
described in this manual. Any other use may cause fire, electric shock or injury, and invalidate the warranty.
' <    
?"$   *@
ensure that the kitchen is adequately ventilated.
&  Q  * *    <
anybody who is not familiar with the contents of this manual to operate the cooktop. These instructions are not 
intended to cover every possible condition and situation. As with any electrical household appliance, use 
common sense and caution when installing, operating and maintaining the cooktop.
< Z
the cord regularly for damage.
Do not use the appliance if the cord, or any other part of the appliance, has been damaged. If the supply cord is 
damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to 
avoid a hazard.

2

Содержание HX-2-6S-4G











Отзывы: