9
© 2014 - 2024 Parktron Technology Ltd.
per meter).
Installation should avoid too close to large size metal objects, heavy power cables,
large water surface, and try to keep loop surface area clean and dry.
Installations close to large size metal objects or influenced by heavy power cables
can try to use “8” shape loop wiring installation. (Refer to the following drawing)
1.3.3. Ground slot cutting for loop wire installation:
Suggested ground slot figure and dimension:
Suggested normal length of Y is 120cm, but adjustable from 100cm~200com.
Suggested length of X is drive way width minus 100cm (50cm from each side of the
drive way edge).
Each corner would have a 10cm x 10cm chamfer.
