28
© 2014 - 2024 Parktron Technology Ltd.
Content of “HostSeting.sh”:
Universal spare IP address: The IP address in the first line 192.168.1.234 (Do NOT
change this one).
Configured IP address: 192.168.0. X (If needed, X is the number to configure); after
changing the default IP address of terminal, please make sure it is matching the IP
address configured in IPMS2000 server program (Under [Config] -> [Device] -> and
select the terminal item).
3.4. Specify terminal program for entry or exit:
Under LocalSeting file directory, the filename “location.in” makes the terminal program
to run in entry mode. When rename to “location.out”, it makes the terminal program to
run in exit mode.
Use command like “mv location.in location.out” to rename “location.in” to “location.out”.
3.5. Time synchronization:
Under LocalSeting file directory, use “vi” to edit file TimeSync.sh.
Make sure time server’s IP address in the red circle (Normally same as the server IP
address: 192.168.0.80).
Universal spare IP (do not change)
Terminal IP address to configure
