Parkside PSTDA 20-LI B3, Перевод оригинальной инструкции

Страница: 9 / 140

9
GB CY
b) Do not use the power tool if the
switch does not turn it on and
off.
Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Remove the plug from the wall
socket and/or remove the re-
chargeable battery before you
change the device’s settings,
change accessory parts or put
away the power tool.
Such pre-
ventive safety measures reduce the risk
of starting the power tool accidentaIly.
d) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
e) Look after the power tool and
application tool carefully. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool’s
operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed.
Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in un-
expected situations.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in chargers
that are recommended by the manu-
facturer. Risk of fi re if a charger that is
suitable for a specifi c type of battery is
used with other batteries.
b) In the power tools, use only the batter-
ies designed for the purpose. The use
of other batteries may result in injuries
and risk of fi re.
c) Keep the unused battery away from pa-
per clips, coins, keys, nails, screws and
other small metal objects, which could
cause bridging of the contacts. A short
circuit between the battery contacts may
cause burns or fi re.
d) If used incorrectly, liquid may leak from
the battery. Avoid contact with this. In
the event of accidental contact, rinse
off with water. If the liquid gets into
eyes, seek medical assistance. Leaking
battery fl uid may cause skin irritations
or burns.
e) Do not use damaged or altered
batteries.
Damaged or altered batter-
ies can be unpredictable and lead to
fi re, explosion or risk of injury.
f) Do not expose batteries to fi re
or elevated temperatures. Fire or
temperatures over 130 °C can cause an
explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions.
Incorrect charging or charging