Parkside PSS 65 C1, Перевод оригинальной инструкции

Страница: 6 / 60

6
GB IE NI CY
General description
The illustrations can be found on
the front and rear fold-out pages.
Scope of delivery
Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
• Appliance
• Sharpener for knives and scissors
• Sharpener for drills
• Sharpener for picks and chisels
• Spare grinding wheel
• Instruction Manual
Function description
The sharpening station is suitable for
sharpening tools (e.g. drills, knives, scis-
sors, picks, chisels). The scope of delivery
contains three sharpeners for this purpose,
which, as a guide and safety device, en-
able precise sharpening and grinding.
Refer to the following descriptions for a
functional description of the controls.
Summary
1 Mains plug
2 Sharpener for knives and scissors
3 On/off switch
4 Spacer
5 Magnet holder
6 Tool table
7 Retaining screw for
angular adjustment
8 Protective hood
9 Mounting holes for work bench
assembly
10 Grinding wheel
11 rotatable drill mount
12 Knurled nut for drill-fastening
13 Release lever for sharpener
14 Drill holder
15 Adjusting device
16 Grinding wheel nuts
Technical specifications
Tool sharpening station .. PSS 65 C1
Nominal
input voltage .......... 220 - 240 V~, 50 Hz
Power consumption P ..... 65 W (S6 20%)*
Power consumption P
0
..........25 W (S1)**
Measurement idling speed n
0
... 6700 min -1
Safety class ..................................... II
Protection category..........................IP X0
Weight
(incl. accessories) ........... approx. 1.37 kg
Grinding angle range ................15° - 50°
Sharpness drill diameter ............ 3 -10 mm
Sharpness knife width .............. 6 - 51 mm
Grinding wheel
Outer diameter .................. Ø 49.5 mm
Borehole diameter ............ Ø 10.14 mm
Thickness ................................7.9 mm
Abrasive ............................... Diamond
Base body ..................................Metal
Working speed ................ max. 60 m/s
Rotational speed ....... max. 23100 min
-1
Sound pressure level
(L
pA
) ................... 60.5 dB(A); K
pA
= 3 dB
Sound power level
(L
WA
) ................. 73.5 dB(A); K
WA
= 3 dB
* Operating mode S6 20%: Continuous op-
eration with intermittent load (cycle time
10 min). In order not to heat the motor
more than permitted, the motor may only be
operated for 20% of the cycle time with the
stated nominal power and must then continue
running for 80% of the cycle time without a
load.
** Operating mode S1: Continuous operation
with constant load