Parkside PPHA 20-Li B2, Оригинальное руководство пользователя

Страница: 18 / 210

PPHA 20-Li B2
GB
│
IE
│
7
■
Safety guidelines for battery chargers
■
This tool may be used by children
aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowl-
edge, provided that they are
under supervision or have been
told how to use the tool safely
and are aware of the potential
risks. Do not allow children to use
the tool as a toy. Cleaning and
user maintenance tasks may not
be carried out by children unless
they are supervised.
■
To avoid potential risks, if the
appliance power cable is dam-
aged, it must be replaced by the
manufacturer, its customer service
or by a qualified technician.
The charger is suitable for indoor use only.
WARNING!
■ If the mains cable requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
♦ A current list of battery compatibility can
be found at www.Lidl.de/Akku.
Original accessories/attachments
■ Use only the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Using attachments or accessory
tools other than those recommended in the
operating instructions can lead to a risk of
injury.
Before use
Charging the battery pack (see fig. I)
CAUTION!
► Always unplug the charger before you
remove the battery pack from or connect it
to the charger.
NOTE
► Never charge the battery pack when the
ambient temperature is below 10°C or
above 40°C. If a lithium-ion battery is to be
stored for an extended period, the charge
level should be checked regularly. The opti-
mum charge level is between 50% and 80%.
The storage climate should be cool and dry,
and the ambient temperature should be
between 0°C and 50°C.
♦ Insert the battery pack into the high-speed
charger (see fig. I).
♦ Insert the power plug into the socket.
The control LED lights up red.
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready for use.
ATTENTION!
♦ If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged.
♦ If the red and green control LEDs both
flash, this means that the battery pack is
defective.