Parkside PFDS 120 A2, Сборка, эксплуатация и инструкции по безопасности, перевод оригинальных инструкций.

Страница: 13 / 201

13 GB/IE/NI/CY/MT
z
Welding-screen-specific
safety notes
„
Use a bright light source (e.g.
lighter) to convince yourself of
the proper function of the wel-
ding screen every time before
starting welding.
„
Welding splashes may dama-
ge the protective screen. Ex-
change damaged or scratched
protective screens at once.
„
Replace damaged or badly
contaminated or splashed com-
ponents without delay.
„
The device must only be ope-
rated by persons who are at
least 16 years old.
„
Familiarize yourself with the
safety provisions for welding.
For this, also observe the safe-
ty notes of your welding unit.
„
Always put on the welding
screen when welding. Non-
use may cause severe injury to
your retina.
„
Always wear protective clo-
thing when welding.
„
Never use the welding screen
without the protective glass,
since the visual unit may
otherwise be damaged. The-
re is a risk of damage to the
eyes!
„
Exchange the protective glass
in time for a good view and
non-fatiguing work.
z
Environments with in-
creased electrical risks
When using welding devices in
environments with increased elec-
trical risks, observe the following
safety notes.
Environments with increased elec-
trical risks include:
„
Workplaces with c onfined
spaces, so that the welder is
working in a confined posture
(e.g. kneeling, sitting, lying)
and touches electrically con-
ductive parts;
„
In workplaces that are who-
lly or partially surrounded by
electrically conductive ma-
terials, and where there is a
high risk from avoidable or ac-
cidental contact by the welder;
„
In wet, moist or
hot workplaces, where humi-
dity or sweat will considerably
reduce the resistance of human
skin and the insulating pro-
perties of the protective equip-
ment.
Safety notes