Parkside PASL 4000 B2, Инструкции по эксплуатации и безопасности

Страница: 7 / 52

7 GB/CY
for the spotlight (when the
rechargeable battery is fully
charged)
Lifespan of LEDs: approx. 80,000 hours
Protection class: III /
Mains adaptor:
Information Value Unit
Manufacturer’s
name or trade
mark, commercial
registration num-
ber and address:
OWIM GmbH &
Co. KG
HRA 721742
Stiftsbergstraße 1,
74167 Neckar-
sulm, GERMANY
Model identifier HZ-G0501000USB
Input voltage 100–240 V∼
Input AC
frequency
50 / 60 Hz
Output voltage 5.0 V
Output current 1.0 A
Output power 5.0 W
Average active
efficiency
73.7 %
No-load power
consumption
0.09 W
Protection class
II /
Protection type IP20 (use in dry lo-
cation only)
Charging station:
Input: 5 V , 1A
Model: TL1221
Q
Scope of delivery
1 LED torch
1 Mains adaptor
1 Charging station
2 Screws
(ø approx. 4 mm)
2 Dowels
(ø approx. 6 mm)
1 Drill template
1 USB cable
1 Operating instructions
Safety instructions
DANGER TO
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children alone and unsupervised
with the packaging material. There is always
a risk of suffocation if children play with the
packaging material. Children often underesti-
mate risks. Always keep children away from the
packaging material. This product is not a toy.
This product can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction con-
cerning use of the product in a safe way and
understand the hazards involved. Children shall
not play with the product. Cleaning and user
maintenance shall not be made by children
without supervision.
This product is not a toy and should be kept
out of the reach of children. Children are not
aware of the dangers associated with handling
electrical products.
Do not use the product if you detect any kind
of damage.
CAUTION! DANGER OF EX-
PLOSION!
Do not operate the
product in potentially explosive
environments in which there are inflammable
vapours, gases or dusts.
Protect the product from moisture and damp.
Never immerse the product in water or other
liquids!
Connect the product to a properly installed
mains socket only. The voltages in each case
must comply with information given in the sec-
tion “Technical data”.
Ensure that the electrical socket is easily ac-
cessible so that you can pull the plug quickly
out of the socket if necessary.
Do not carry out any modifications or repairs
to the product yourself. The LEDs cannot and
must not be replaced.