Parkside PAAS 12 A2, Перевод оригинальной инструкции

Страница: 8 / 232

GB
│
IE
│ 3 ■ PAAS 12 A2
Technical data
Cordless Garden Saw 12V PAAS 12 A2
Rated voltage 12 V (DC)
Rated idle speed n
0
0–2700 rpm
Stroke length 20 mm
Max. cutting
performance
Wood 80 mm
Metal profiles/
metal pipes 50 mm
Saw blade holder 12.7 mm (1/2”)
Battery pack PAPK 12 A3*
Type LITHIUM ION
Rated voltage 12 V (DC)
Capacity 2.000 mAh/24 Wh
High-speed battery charger PLGK 12 A2*
INPUT
Rated current 220–240 V ∼,
50–60 Hz (AC)
Rated power
consumption 50
W
OUTPUT
Rated voltage 12 V (DC)
Rated current 2400 mA
Charging time approx. 60 min.
Fuse (internal) 2 A
T2A
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission values
Measured values for noise determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool at the working location is typically
as follows:
Sound pressure level
L
pA
= 84.3 dB (A)
Uncertainty K
pA
= 3 dB
Sound power level L
WA
= 95.3 dB (A)
Uncertainty K
WA
= 3 dB
Wear hearing protection!
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Cutting board
a
h,B
= 7.845 m/s 2
Uncertainty K = 1.5 m/s 2
Cutting wooden beams a
h,WB
= 9.154 m/s 2
Uncertainty K = 1.5 m/s 2
NOTE
► The declared total vibration value and the
declared noise emission value have been
measured according to a standardized test
procedure and can be used to compare one
power tool with another.
► The specified total vibration value and noise
emission value (s) can also be used for a
preliminary estimation of the load.
WARNING!
► The vibration and noise emissions during the
actual use of the power tool may deviate
from the indication values, depending on the
manner in which the power tool is used, in
particular, which type of workpiece is being
processed.
► It is necessary to establish safety measures to
protect the operator based on an estimation
of the vibration load during actual use (all
states of operation must be included, e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).