PET 25 C3
■
36
│
GB
│
MT
Setting the impact force
NOTE
►
Select the lowest impact force sufficient for
stapling . Take into account the length of the
staples or nails you are using as well as hard-
ness of the material you are working with .
Impact force control
Increasing the impact force
♦
Turn the impact force control anticlockwise .
Reducing the impact force
♦
Turn the impact force control clockwise .
Use
Switching on and off
♦
Set the ON/OFF switch to the position "I" to
switch the appliance on .
♦
Set the ON/OFF switch to the position "0" to
switch the appliance off .
Stapling/nailing
♦
Switch the appliance on by moving the ON/
OFF switch to the position "I" .
♦
Press the face plate of the appliance onto
the location on the material that you want to
staple/nail .
♦
Press the trigger .
NOTE
►
The integrated safety switch on the face plate
prevents accidental triggering .
Working with the rip fence
If you want to tack with nails or staples at a
constant distance to an edge, proceed as follows:
♦
Pull out the rip fence in the direction of the
arrow .
♦
Move the rip fence along the scale until it
is at the required distance from the edge of the
object that you want to work on .
♦
Place the rip fence onto the edge of the
object that you want to work on .
♦
Proceed as described in the section
Stapling/
nailing
.
