103
➔
Upon successful setup, the Keyfob will emit two beeps, indicating that it's ready
for use.
➔
The keyfob can store only one device in its memory and it is controlled by
pressing the keyfob button.
6.7. Barrier Key Reset
The Barrier digital key is set once the Barrier is added to a user account. This key can
only be removed by resetting it.
The reset is done by pressing and holding the Reset
button for 3 seconds until the green LED lights up.
When the Barrier is in the reset
state it can be added again to a user account via the Parklio Connect application.
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
Содержание Barrier
Страница 1: ...1 Parklio Barrier USER MANUAL...
