7
5.1 USE - PARKING
1.
Before parking your bicycle make sure that there are no children or pets around to avoid
accidents. Hold your bicycle so that both wheels are on the line perpendicularly to the sur-
face that PARKIS is fastened to.
2.
Use one hand to lightly hold a handle bar of your bicycle (first time users are advised to
pick the bar underhand) and firmly take the saddle with the other hand. We recommend
you to hold the saddle with your leading hand. (fig. 4.A)
3.
Firmly push the saddle forward while lifting up the handlebar lightly (stronger for heavy
bicycles) and directing the front wheel towards the wheel locking mechanism until the
wheel locks. Attention! Do not push the handle bar downwards! Let the front wheel go up
freely (fig. 4.B and 4.C). At the same time hold firmly the saddle and direct a rear wheel so
that it goes in the middle of the stand. Your bike is parked! (fig. 4.D)
NOTE!
If the wheel has not been locked from the first time and the dolly has moved up
-
wards, just put your bicycle aside safely, use a hand to push the dolly down until fixed
position (fig. 3.C) and repeat the parking process once again. Some practice is necessary
to get used to parking your bicycle this way. While parked your bicycle has to be protected
from accidental impact (eg. turning or bending) as this can damage the equipment, your
bicycle or harm a person.
4.A
4.C
4.D
4.B
5.2 USE - REMOVING A BICYCLE
Hold the saddle (not the handlebar!) by hand and firmly pull the bicycle towards yourself
(fig. 5.A). As the bicycle starts descending push a handlebar down with your other hand
(fig. 5.B & 5.C) until the front wheel reaches the ground and is removed from the wheel
locking mechanism (fig. 5.D). Your bicycle is removed from the parking equipment!
5.A
5.C
5.D
5.B