6
4. ASSEMBLY INSTRUCTIONS
4.1
To install PARKIS, wall and floor surface must be even and level. Place the parking
equipment on the floor, lean it to the wall and mark the spots for screws to be fastened.
If you intend to mount PARKIS to the masonry wall (which is recommended), make pi
-
lot holes for fastening screws, install screw anchors, lean the equipment along the wall
accurately and screw the equipment to the wall tightly. For other types of wall please
obtain suitable screws.
4.2
Remove safety-catch (fig. 3.A).
4.3
Put a wheel’s support to the horizontal position (fig. 3.B).
4.4
Push a wheel locking mechanism (in further text – dolly) to the ground position lim
-
it. You will normally feel resistance while pushing. It will fix automatically on floor level
(fig. 3.C), now your PARKIS is ready to use!
3.A
3.B
3.C
Fig. 3.