The electronic timer
Please note that this is a 24 hour clock, for example 2.00 pm is shown
as 1400.
In the following pages we explain
how to set the controls. Read through
them a few times until you are familiar
with the procedure.
If the oven is switched off on the wall, or there is a loss of power, the
clock will stop and you will not be able to use the main oven. When you
first switch the electricity supply on, the timer display will flash.
To set the time of day
Turn the selector knob to 'Manual' then
turn to 'Clock'.
Set the correct time by turning and
holding the setting knob clockwise.
Adjust the time by turning the setting
knob in either direction.
Turn the selector knob back to 'Manual'.
To use the Timer
Turn the selector knob to 'Timer'. Turn
the setting knob clockwise until the
display shows the time you want. The
bell symbol ( ) will be showing and
this will stay lit up during the time. Our
diagram shows the timer set to 5
minutes.
If you change your mind and want to cancel the time you have set,
simply turn the setting knob anticlockwise. Then turn the selector to
'Manual'.
S I G 5 5 6
22
The electronic timer
Cookpot symbol
Setting knob
Bell symbol
Selector
Содержание SIG 556
Страница 1: ...SIG 556 Operating and Installation Instructions...
Страница 52: ...52 N O T E S...
Страница 53: ...53 N O T E S...
Страница 54: ...54 N O T E S SIG 556 311625804...