Parking Facilities PF9500A, Руководство по эксплуатации и обслуживанию

Страница: 14 / 40

PLC Guide
Menu/Ok
SR2 B121BD
1 2
Q1
1 2
Q2
1 2
Q3
1 2
Q4
+
-
I1 I2 I3 I4 IB ID IC IE
24VDC
24VDC 24VDC Analog or
IB....IE Inputs I1...I4
Outputs
Q1...Q4 : Relay 8A
1. Inputs
Input Polarity Connected to Operation when active
I1 Normally Closed Stop circuit Barrier stops if door open
I2 Normally Open Raise signal Raises Barrier
I3 Normally Open Lower signal Lowers barrier
I4 Normally Open Raise Limit Barrier in Open Position
IB Normally Closed Loop detector/Safety loop Detects vehicle on loop/Lowers when not detected
IC Normally Open Free entry/Free exit loop Barrier opens when vehicle present on loop
ID Normally Open Lower limit Arm has reached fully closed position
IE Normally Closed Photocells Photocells Active
2. Outputs
Output: Polarity: Connected to: Operation when active:
Q1 Normally Open Motor controller open direction Active to open barrier
Q2 Normally Open Motor controller close direction Active to close barrier
Q3 Normally Open Boom light or Magnetic arm lock Signal given to accessories
Q4 Normally Open Flashing beacon/Siren (if installed in
program) Signal given to accessory if installed in PLC program
The table (bottom) relates to the diagram directly below to help you trouble shoot electrical component errors
Menu/Ok
SR2 B121BD
1 2
Q1
1 2
Q2
1 2
Q3
1 2
Q4
+
-
I1 I2 I3 I4 IB ID IC IE
24VDC
24VDC 24VDC Analog or
IB....IE Inputs I1...I4
Outputs
Q1...Q4 : Relay 8A
1. 2.
1 B 234 CDE
RUN LD
SUN 20 JUL 09:36
1234
1234 BCDE
STOP LD
SUN 20 JUL 09:37
2 4 1 3
Input displays
which change
as inputs used
detailed in the
table below.
Example
showing number
I1 and IB input
selected
Showing program in “run mode”
Showing program in “Stop mode”
Output displays
which change
as Outputs used
detailed in the
table below.
Example
showing number
Q1 and Q3
output selected
Date/Time Display Date/Time Display
Note:
If barriers are set up as a master and slave then Q3 and Q4 are used to control slave barrier. This is a
special wiring configuration and you must seek advice from your supplier on how to configure this
combined with other accessories.
!