Parker PVSG-IQAN-C2E1M2W1U1, Руководство пользователя, Страница: 59 / 70

50
Markings/Approvals
The PVSG-IQAN meets the following regulations.
9.1. ISO Standards/Certifications
EMC
Radiated Emissions
CISPR 25 Method, 30 - 1000MHz, ISO 13766 Limits, FCC CFR
47 Part 15B, Class A; ICES-003
Conducted Immunity
ISO 11452-4 (BCI), 20 - 200MHz at 100mA
Radiated immunity
ISO 11452-2 (ALSE), 200MHz-2000MHz 1kHz AM 80% at
200V/m; 800-2000MHz PM at 200V/m
EN 61000-4-3, 1000-6000MHz 1KHz AM 80% at 3V/m; 80-
920MHz spot- check 1kHz AM 80% at 3V/m
ESD 1
ISO 10605 powered, 8kV contact, 15kV air; unpowered 15kV
contact, 25kV air
Electrical
Reverse Polarity -32V
Jump Start/ Over-Voltage +36V
Short Circuit All I/O protected against shorts to vehicle battery or ground,
except pins 13-17 (unused in application)
Transient Immunity
ISO 7637-2, Pulse 1, 2a, 2b, 3a, 3b
Starting Profile
ISO 16750-2, Section 4.6.3
Load Dump
ISO 16750-2, Section 4.6.4, 40V clamped
Mechanical
Mechanical Shock
50G, 11ms, half-sine pulse, 100 cycles in each of 6 directions
Random Vibration 1
27.8 m/s2 RMS (~2.84 Grms), 10-2000 Hz, 8 hours in each of
3 axes
Bench Handling Shock 1 1000mm height, drop in all 3 axes in both directions
9. Markings/Approvals