30
Gateway Connections (Pinout)
4.1.2.
Pinout
The following tables shows the pin-outs for the connectors:
Figure 14: PVSG-IQAN connector
The pins with
italicized
descriptions are not used in the IQAN Connect solution. It
is recommended to plug the un used pins for the connector.
The pins with bold descriptions are required for the device to boot.
Main Connector Pin-out
Pin
Function
1
Ethernet TXN
2
Ethernet TXP
3
Ethernet RXN
4
Ethernet RXP
5
Battery Negative (-) Module
6
Unswitched Battery (+) Module
7
CAN0/CANA - High
8
CAN0/CANA - Low
9
CAN1/CANB
–
High (default IQAN diagnostic bus)
10
CAN1/CANB
–
Low (default IQAN diagnostic bus)
11
Keyswitch (+)
12
Input STB/ STG/VTD ( 0 to 5.66 V)
13
USB Power
14
USB DM (D-)
15
USB DP (D+)
16
USB ID (OTG)
17
USB Ground
18
150mA Sinking Output
Содержание PVSG-IQAN-C2E1M2W1U1
