Parker PVSG-IQAN-C2E1M2W1U1, Руководство пользователя

Страница: 37 / 70

28
Mounting the PVSG-IQAN to a Vehicle
3.2. Designing and Connecting the Vehicle Harness
The vehicle manufacturer or integrator is responsible for designing a vehicle
harness that mates with the PVSG-IQAN connector(s).
The vehicle harness design depends on the following:
▪
How the user’s inputs, ou tputs, communication, and power pins are
configured.
▪
Other components on the vehicle and their physical locations.
▪
The routing of the harness.
Details on recommended wire diameters for use with the product connector are
covered in the connector manufactu
rer’s datasheet. Wire diameters used
should be enough for the expected module current.
To use the remote diagnostic features of the PVSG-IQAN gateway, the
diagnostic bus of the gateway must be properly connected to the diagnostic bus
of the IQAN control system.
Once the vehicle harness is designed, it can be connected to the PVSG-IQAN
simply by clicking the mating connectors into the connector ports on the PVSG-
IQAN.
Damage to Equipment! The technician installing the connector should
take special care that the connector is inserted in the correct
orientation as power applied to unprotected pins can cause
permanent damage to the gateway.