
20
Quick Start Guide
The security section of the IQAN application must also be updated before remote
diagnostics can be performed. Under the security properties there are 3 options that must
be setup.
The security permissions are modifiable by an OEM or integrator; however, the OEM or
integrator takes full responsibility to ensure that the proper safety guards are in place to
ensure that remote diagnostics cannot be performed in unsafe state.
2.2.3.
Remotely Connecting to your IQAN system
After the PVSG-IQAN gateway has been installed,
system is ready to connect. The user must next make sure the vehicle is on, power is
supplied to the system and the gateway is connected to the IQAN Connect servers with the
Figure 10. IQAN Design security settings for remote connectivity.
Содержание PVSG-IQAN-C2E1M2W1U1
