Parker PSVG-IQAN-C2E1M2W1U1, Руководство пользователя

Страница: 20 / 56

10 PSVG-IQAN-C2E1M2W1U1
Quick Start Guide
The security section of the IQAN application must also be updated before remote
diagnostics can be performed. Under the security properties there are 3 options that
must be setup.
The security permissions are modifiable by an OEM or integrator, however the OEM
or integrator takes full responsibility to ensure that the proper safety guards are in
place to ensure that remote diagnostics cannot be performed in unsafe state.
2.2.3. Remotely Connecting to your IQAN system
After the PVSG-IQAN gateway has been installed, per section 3 and 4 of this
manual, the system is ready to connect. The user must next make sure the vehicle is
on, power is supplied to the system and the gateway is connected to the IQAN
Connect servers with the blinking green status light. There is no activation required,
the system will connect immediately.
Danger! Risk of death or injury. Ensure that the vehicle is in a
safe state before performing remote diagnostics or program
updates.
Figure 6. IQAN Design security settings for remote connectivity.