16
Installing your own SIM card
7 Installation
Instruction book, IQAN- G3
C
AUTION
ESD precautions should be taken during disassembly. It is highly recommended to
wear an ESD wristband when installing the GSM SIM card
Use ESD precautions and equipment when opening the enclosure to install the GSM
SIM card. In the IQAN-G3, the card holder is placed inside the housing. The housing
has to be opened to access it. The card holder is mounted to the PCB.
Opening the enclosure
To open the IQAN-G3 enclosure, remove the 4 screws holding the enclosure halves
together (2 on label surface, 2 on the opposite side). Carefully pull the enclosure apart.
Opening the enclosure.
C
AUTION
Possibility of electrostatic discharge when installing SIM card.
Use ESD precautions and equipment when installing the GSM SIM card.
Inserting the SIM card
Eject the SIM card socket by pressing the button next to the SIM card socket holder.
Place the SIM card into the socket. Slide the SIM card socket into the SIM card holder
making sure of the correct orientation (contact area down). Carefully push the two
enclosure halves back together and install the 4 screws.
Inserting the SIM card.
remove
S
IM
CARD
button
