1
Safety symbols
1 Introduction
Instruction book, IQAN- G2
1
Introduction
These instructions are to be used as a reference tool for the vehicle manufacturer’s
design, production, and service personnel.
The user of these instructions should have basic knowledge in the handling of
electronic equipment.
Safety symbols
Sections regarding safety, marked with a symbol in the left margin, must be read and
understood by everyone using the system, carrying out service work or making changes
to hardware and software.
The different safety levels used in this manual are defined below.
W
ARNING
Sections labeled
WARNING
with a caution symbol in the left margin, indicate that a
hazardous situation exists. If precautions are not taken, this could result in death, injury,
or property damage.
N
OTICE
Sections labeled
NOTICE
with a notice symbol in the left margin, indicate there is
important information about the product. Ignoring this could result in less than optimal
performance, or damage to the product.
Compliance with FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Contains transmitter FCC ID: UDV-0912142009007
•
FCC Part 15/47 CFR Ch I (10-01-2010) Conducted Emission Limits
•
FCC Part 15/47 CFR Ch I (10-01-2010) Radiated Emission Limits
regarding Part 15 of the FCC-rules (Class B digital devices)
Contact the manufacturer if there is anything you are not sure about or if you have any
questions regarding the product and its handling or maintenance.
The term "manufacturer" refers to Parker Hannifin Corporation.
