12
Connector, C1
6 Installation
Instruction book, IQAN- G2
6
Installation
Connector, C1
Connector pin assignments
Connector, antenna
Antenna
Installing the SIM card
N
OTICE
The correct PIN code must be set in the IQAN-G2 (using IQANrun) before mounting
the SIM card. Otherwise, the SIM card could be locked. A
PIN Unlock Key,
PUK code
is required for unlock.
C
AUTION
ESD precautions should be taken during disassembly. It is highly recommended to
wear an ESD wristband when installing the GSM SIM card
Use ESD precautions and equipment when opening the enclosure to install the GSM
SIM card. In the IQAN-G2, the card holder is placed inside the housing. The housing
has to be opened to access it. The card holder is mounted to the PCB.
Cable kit
Parker no. 20077744
Type
M12-5, 2 m lgth, flying leads
Logical
Symbol
Pin
No.
(I)nput or
(O)utput
Function description
and/or Signal name(s)
+BAT
2
-
Power supply, positive.
-BAT
1
-
Power supply, negative ground
CAN-H
4
-
CAN high
CAN-L
5
-
CAN low
Connector kit
Parker no. N/A
Type
FME
Antenna kit
Parker no. 20077743
Type
GSM low profile magnetic
4
1
3
5
2
