Index
High power devices
42
192-120149 N08 June 2014
A
Additional conditions of utilization • 13
Analogue / encoder (plug X11) • 32
Assignment of the X22 connector • 34
B
Braking resistor / supply voltage C3H • 28
C
C3 ServoManager • 4
Capacitors • 8
Compax3 device description • 17
Compax3H connections front plate • 24
Compax3H plugs/connections • 21
Conditions of utilization • 12
Conditions of utilization for cables / motor filter •
13
Conditions of utilization for CE-conform
operation • 12
Conditions of utilization for UL certification
Compax3H • 14
Conditions of utilization mains filter • 12
Connect braking resistor C3H • 28
Connection of the digital Outputs/Inputs • 33
Connection of the power voltage • 22
Connection of the power voltage of 2 C3H 3AC
devices • 28
Connections of Compax3H • 21
Connections of digital inputs and outputs M10 &
M12 • 34
Connections of the encoder interface • 32
Connector assignment Option M21 X20 • 35
Connector assignment Option M21 X21 • 36
Control voltage 24 VDC C3H • 27
Current on the mains PE (leakage current) • 15
D
Device assignment • 6
Digital input/output option M12 (I12) • 34
Digital inputs/outputs • 33
Digital inputs/outputs (plug X12) • 33
E
EC declaration of conformity Compax3H • 16
G
General hazards • 9
I
Introduction • 6
L
LEDs • 17
Level • 33
M
M21 analog input option • 35
Mains connection Compax3H • 27
Meaning of the status LEDs - Compax3 axis
controller • 17
Motor / Motor brake C3H • 26
Mounting and dimensions C3H • 18
Mounting distances, air currents
Compax3H050V4 • 19
Mounting distances, air currents
Compax3H090V4 • 19
Mounting distances, air currents
Compax3H1xxV4 • 20
N
Notes on the Documents Supplied • 3
O
Optional input/output cards • 34
P
Packaging, transport, storage • 8
Plug and pin assignment C3H • 24
Plug assignment Compax3S0xx V2 • 29, 30
Power supply voltage DC C3H • 28
R
Resolver • 30
Resolver / Feedback (connector X13) • 30
RS232 / RS485 interface (plug X10) • 29
RS232 plug assignment • 29
RS485 plug assignment • 29
S
Safety instructions • 9
Safety-conscious working • 9
Scope of delivery • 6
Signal interfaces • 29
Special safety instructions • 10
State of delivery • 17
Status LEDs • 17
Storage • 8
Supply networks • 15
T
Technical Characteristics • 37
Type specification plate • 7
U
Usage in accordance with intended purpose • 9
USB - RS232 converter • 29
W
Warranty conditions • 11
5. Index
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - [email protected]