The Keypad
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
Page
8-49
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Password Protection (6901 keypad)
When activated, the password prevents unauthorised parameter
modification by making all parameters “read-only”. If you attempt to
modify a password protected parameter, you will be prompted for the
password.
The password protection is activated/deactivated using the PASSWORD
parameter.
To Activate Password Protection
By default the password feature is deactivated, i.e. 0000.
1.
Enter a new password in the PASSWORD
parameter (anything other than the default value
of 0000), for example 0002.
2.
Press the
E
key repeatedly until the Welcome
screen is displayed. Pressing the
E
key again
activates password protection.
Note
Perform a SAVE CONFIG if you need the
password to be saved on power-down.
MMI Menu Map
1
SETUP
2
MENUS
3
ACCESS CONTROL
PASSWORD
PASSWORD
PASSWORD
0000
PASSWORD
0002
WELCOME
PASSWORD
M
E
XXXX
repeatedly
E
LOCKED
Æ
Æ
