8 - Chemical anchoring on flat ground
StradaPAL – Installation manual
22/43
8.
Chemical anchoring on flat ground
8.1
Recommended ground
For best anchoring on flat ground, Parkeon recommends the following:
a concrete base, B25 quality as a minimum,
minimum concrete thickness 500 mm (250 mm drilling depth) over a
minimum area of 600 mm x 600 mm,
a perfectly horizontal surface: check if the ground is level using a spirit
level.
8.2
Equipment required
Tools required:
-
impact drill,
-
Ø20 concrete bit, at least 300 mm long,
-
rifle type brush,
-
blow nozzle,
-
rule,
-
spirit level,
-
rubber mallet,
-
masking tape,
-
chemical anchoring kit (not supplied),
-
kit for fastening on flat ground (with or without base box according to
the selected option),
-
one or two removal protection nuts (optional).
IMPORTANT:
The chemical anchoring kit is not supplied by Parkeon.
Parkeon recommends the use of a SPIT C mixplus chemical anchoring kit.
Check the drilling diameter required depending on the type of chemical
anchoring required.
D6181
