PARK WAREHOUSE ZipCrank 685se275-4, Инструкция по установке, Страница: 1 / 4

1
Item Qty Description Item Qty Description
A 1 Height Adjuster Frame G 8 3/8” Lock Washer
B 1 Electrical Handy Box H 1 BA980EW Electric Wand (Optional)
C 1 Height Adjust Label I 1 BA980 Electric Saddle & Wand Box Assembly (Optional)
D 8 3/8” X 3” Hex Bolt J 1 BA975KS Key Switch (Optional)
P A R T S L I S T
E 8 3/8” Hex Nut K 2 1/2” X 1 1/2” Hex Bolt (Included w/Saddle & Wand Box)
F 16 3/8” Flat Washer L 2 1/2” Flange Nut (Included w/Saddle & Wand Box)
Warning!
Wall structure must safely support additional weight of height adjuster.
980RSE = 175lbs , 980RTE = 190lbs

Inspect all contents prior to installation. Report any missing parts to dealer immediately.

Read all instructions before proceeding.
1. Mount Height Adjuster Frame (A) to wall structure with 3/8” X 3” Hex Bolts (D), 3/8” Hex Nuts (E),
3/8” Flat Washer (F) and 3/8” Lock Washer (G). See Figure 1.
2. Level
Height Adjuster Frame (A) to playing surface/wall structure. Tighten all hardware.
3. Mount backboard assembly to the
Height Adjuster Frame (A) using mounting brackets shown.
Hardware included in backboard packaging or existing in previously installed product. See Figure 1.
4. Mount rim to backboard. Hardware included in rim packaging or existing in previously installed
product.
5. Level backboard and rim to playing surface. Tighten all hardware.
6. Using the supplied
Electrical Handy Box (B) make the junction from the actuator to either the BA980
Electric Saddle & Wand Box Assembly (I) or the BA975KS Key Switch (J). If using the BA980 Electric
Saddle & Wand Box Assembly (I) find an easily accessible place on the wall structure. Using the 1/2”
X 1 1/2” Hex Bolts (K) and the 1/2” Flange Nuts (L) clamp it to the wall structure. See Figures 1 & 2.
Warning!
It is strongly recommended that a qualified electrician be used to do all wiring.
ZipCrank Height Adjuster
SKU: 68 5se 4 5 27 - & 5 685se275- Installation