5115 Hadley Ave. N., St. Paul, MN 55128 (USA) www.parktool.com
PARK TOOL CO.
SG-8
Instructions / Instructions / Anleitung / Instrucciones
1
2
6
7
9
4
5
8
3
SG-8 PART NUMBERS
Ref. # Part #
Description
Qty.
1
716B
Threadless Guide Body
1
2
716-7
Pad
1
3
722
Handle & Plunger Assembly
1
4
723B
Washer
1
5
723A
Button Head Cap Screw M3 x 8
1
6
719
Guide Plate
1
7
720-8
Cover Plate
1
8
714-8
Saw Guide Shim
1
9
715
Button Head Cap Screw M6 x 35
2
10
782
Handle
1
SG-8 Threadless Saw Guide for
Carbon Composite Forks
Designed to accommodate wider saw blades used
specifically for cutting carbon composite tubes,
the SG-8 ensures a straight, clean cut on 1”, 1-1/8”
and 1-1/4” threadless forks.
Instructions:
1. Carefully mark location of fork to be cut.
2. Slide SG-8 onto fork until mark is visible
through slot. Tighten handle (ref. #10) with
moderate finger pressure. Excessive pressure
may strip threads in SG-8 and damage fork.
3. Clamp guide plate (ref. #6) into bench vise.
4. Set blade of hack saw in slot of SG-8 and saw
through fork. Do not apply excessive pressure
on the blade. Keep hacksaw traveling straight
down the slot.
5. Remove fork and finish cut end with
fine sandpaper.
