ParaZero SafeAir M600, Руководство по установке

Страница: 27 / 37

SafeAir™ M-600 Installation Guide
27
www.parazero.com
SafeAir M-600 V2 model
8.5 Troubleshooting
System powers up and stays on red LED

If the safety pin is still in place, remove it and perform a power cycle.

Verify that the parachute connector is connected correctly. See SmartAir’s back side
socket c on SmartAir Connectors Overview chapter.

If the problem persists, contact Parazero for further instructions.
System powers up and stays on yellow LED blinking once

Check that both RC channels are in their safe (deactivated) position.

Check that in the DJI Assistant channel configuration menu (Tools) both blue indicators
are on their left side for the Fire and Arm channels.

Check RC connector is properly connected to the SmartAir.

Check channels are properly connected to the A3.
System powers up and stays on yellow LED blinking twice
Check the drone is level.
System powers up and stays on yellow LED blinking 3 times

SD card problem.

Contact Parazero for further instructions.
There are no audio indications
Check that the buzzer connector is properly inserted.
System does not power up
Check that the power cable (coming out of the TerminateAir) is properly connected to the
SmartAir.
Fly Safely!
Should you have questions, contact our support team at –
support@parazero.com
Phone – +972-36885252