SafeAir™ M-600 Installation Guide
11
www.parazero.com
4.3
Connecting the Parachute System to the
Drone
Caution
During all installation stages, be sure –
Not to connect the batteries to the system.
That the safety pin remains in its proper place.
That the safety cover remains in its place, covering the system.
Important Notice: When connecting to a Matrice 600 (Not Pro), it is required to move the GPS
antenna and reconfigure its position in the DJI assistant.
1
Gently turn back the drone on
its legs.
2
Before connecting the
parachute to the drone make
sure you’ve connected the
buzzer to the SmartAir.
3
Position the parachute system
above the center plate, in the
correct orientation as seen in
the picture below. The two
motors colored in red, and the
arrows on the GPS antenna
show the front side of the
M-600.
The SmartAir computer is on
the back side of the canister.
4
Extract the original screws
near the arms positioned near
each of the SafeAir M-600 v2
legs.
5
Connect all 4 legs to the main
plate of the drone, each with
3 screws. Before screwing
them, apply some Loctite to
the screws.
