Parata Systems AccuCount II, Руководство пользователя

Страница: 4 / 150

AccuCount II User Guide
iv 120-0313 Rev 04
Safety Recommendations
WARNING!
The Bar Code Laser Scanner uses a low-power, visible laser diode. As with any bright light
source, such as the sun, you should avoid staring directly into the light beam. Momentary
exposure to a CDRH Class II laser is not known to be harmful. The Scanner is certified to
be a Class II Laser Product with the United States Department of Health and Human
Services Center for Devices and Radiological Health. Do not look directly into the laser
beam.
WARNING!
The AccuCount II operates on 110VAC electrical voltage. The AccuCount II must only be
used with the power adapter supplied exclusively for use with the AccuCount II. Be sure to
hold the plug, not the cable, when disconnecting the device from an electrical outlet.
WARNING!
Before inserting the power adapter, make sure that the operating voltage stated on the
power adapter agrees with the main voltage. If not, contact Parata Systems Customer
Care.
WARNING!
If the power adapter or its cables is damaged, the AccuCount II must immediately be
disconnected from the electricity supply. The AccuCount II must only be operated with a
power adapter in perfect working condition.
WARNING!
Take care when weighing liquids in containers so that no liquid spills into the AccuCount II
or into connections on the rear of the equipment or into the power adapter.
If a spill occurs, immediately unplug the AccuCount II from the main electricity supply and
contact Parata Systems Customer Care.
WARNING!
There are no user-serviceable parts located within the AccuCount II.
Contact Parata Systems Customer Care for repair or replacement.
WARNING!
Only UL-listed devices (or equivalent) may be used with the AccuCount II.