Parata Systems AccuCount II, Руководство пользователя

Страница: 35 / 150

120-0313 Rev 04 2–11
Chapter 2 – Overview
2.6.2 Number and character entry
Enter letters, numbers, and symbols much like you would enter letters using the
numeric keypad of a telephone.
To enter an alphanumeric value using the soft keys
1 Repeatedly press the appropriate soft key until the desired letter, number, or symbol appears.
2 If the next character that you want to enter is on the same soft key, wait for the cursor to move
over one space and then repeat step 1 for the next character.
If the next character that you want to enter is on a different soft key, you may begin to press
that key immediately. The cursor moves over to the next space instantly.
3 Repeat the above steps to enter the complete alphanumeric value; then press the Enter soft
key to finish.

If you enter the wrong character, use the Backspace soft key to delete it.

If you want to cancel out of alphanumeric value entry, press the ESC soft key.
NOTE You can also use a USB keyboard for alphanumeric entry.
2.6.3 Examples
To enter the letter “D”
1 Press the ABCDEF soft key four times.
To enter the label “TECH 1”
1 Press the STUVWXYZ soft key two times, so that a T appears above the cursor.
2 Press the ABCDEF soft key five times, so that an E appears above the cursor.
3 Wait for the cursor to move right one space.
4 Press the ABCDEF soft key three times, so that a C appears above the cursor.
5 Press the GHIJK soft key two times, so that an H appears above the cursor.
6 Press the Rotate key twice, so that the Space soft key appears over soft key 2.
7 Press the Space soft key.
8 Press the Rotate key one time, so that the 12345 soft key appears over soft key 2.
9 Press the 12345 soft key once, so that a 1 appears above the cursor.
10 Press the Enter soft key to save your entry.