Parata Systems AccuCount II, Руководство пользователя

Страница: 116 / 150

AccuCount II User Guide
4–62 120-0313 Rev 04
4.3.4 Rx-Check and Non-Rx-Check settings
The Rx-Check and Non-Rx-Check applications share the same basic settings; however,
they
do not share Protocol settings (though you define those settings the same way in
both applications).
Figure 4-8: Rx-Check and Non-Rx-Check setting screens
...: Net / App.Unit Outputs the number of items being weighed and the unit in use (PCS).
NOTE: Only available for the Piece Counting application.
...: CheckW. Nom. Outputs the nominal weight that the scale is using for the
CheckWeigher function.
...: CheckW. TO Outputs the overweight tolerance for the CheckWeigher function.
...: CheckW. TU Outputs the underweight tolerance for the CheckWeigher function.
...: Min.samp.weight Outputs the minimal sample weight as defined in the scale’s
Configuration.
See “Min. sample weight” on page 4-28.
ID - ID 1|2|3|4|5|6 Outputs the (alpha)numeric value of identification 1, 2, 3, 4, 5, or 6.
See “ID 1|2|3|4|5|6” on page 4-50.
...: Item counter Outputs the number of printouts that have been made (or the value
that you have specified with the
Set No. soft key; see “Set Item
counter” in Table 4-35 in “Soft keys” on page 4-52).
HEX line 1|2|3|4 Outputs the contents of the free HEX line 1, 2, 3, or 4.
See “Protocol” on page 4-60.
Linefeed Outputs an empty line.
Underline Outputs a line across the printout.
Table 4-39: Protocol Position option definitions (cont’d)
Option Function