Parasound HCA-800 II Скачать руководство пользователя страница 1

  O     W       N      E      R    ‘     S              M      A      N     U      A      L

HCA - 800 II High Current Power Amplifier

Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasaund. Your HCA-800II has been designed with the latest technology to become the heart of the finest
music systems. Its high power output is matched by enormous current capacity to drive virtually any speak-
ers known. A robust 700vA toroid transformer and 30,000uF power supply assure power in reserve. An
ultra-fast discrete A/AB output stage assures flawless reproduction. You have made an excellent choice.

Please take a few moments now to read these instructions thoroughly so you may fully understand the
sophisticated capabilities of your new power amplifier.

Unpacking

Save your carton and the cardboard inserts for future safe transport in case you move or the unit requires
shipping for repair.  Note: the actual printed carton is not itself strong enough for safe shipping: you must
place this carton into an additional outer "overcarton" before shipment.

Before you proceed, find the serial number which is located on the rear panel of the unit and note it here for
future reference or in case the unit is ever stolen_________________.

Содержание HCA-800 II









Отзывы: