background image

THANK YOU!

Congratulations and Thank You for Choosing Parasound

Your new Parasound Halo T 3 Tuner presents the latest advancements in tuner technology.
The T 3 is built to the strict quality and performance standards set by Parasound. We’re
proud to offer you this exceptional audio component that will bring you many years of
enjoyment and dependability.

Here at Parasound, we design our products to perform at a higher level of flexibility
and sonic performance than you may have expected. We encourage you to read this
entire manual to learn all the features and capabilities of your new Halo T 3 Tuner.

If you’re eager to get up and running right away, simply follow the basic step-by-step
instructions to connect and operate the T 3. If you want to learn about some of the
technical and design aspects of your T 3, refer to the 

Technically Speaking

and 

Design

Overview

sections in the back of the manual. If you run into difficulties, the 

Troubleshooting

Guide

should help you quickly remedy the problem.

We appreciate you taking the time to read these instructions and thank you for selecting
Parasound for your listening pleasure.

The Parasound Staff

Keeping Records for Future Reference

Record the serial number located on the bottom of your T 3 in the space below. Also note
your Parasound Deale’s name and phone number. We recommend that you keep your
purchase receipt with this manual and store them both in a safe place. You may need to
refer to this information sometime in the future.

Parasound T 3 Tuner Serial #:__________________________

Parasound Dealer: ____________________________________

Phone Number:_______________________________________

Date of Purchase: _____________________________________

YOU SHOULD KNOW

There is no Parasound warranty for this unit if it was not purchased from an Authorized
Parasound Dealer. Investigate any warranty claims made by unauthorized dealers very
carefully as you will need to depend entirely upon the dealer, and NOT upon Parasound.
Unauthorized dealers may lack the capability to arrange repairs of Parasound equipment.
Authorized Parasound Dealers are listed at www.parasound.com or you can call 415-397-7100
between 8:30 am and 4:30 pm Pacific time.  

A missing or tampered serial number could indicate that this unit was stolen or sold by an
unauthorized dealer. You should return it to your dealer immediately for replacement or a full refund. 

Содержание Halo T 3




























Отзывы: