5
liGHt BUlB rePlaceMeNt
CaUTIOn WHen CHanGInG BUlBs
rePlaCe OnlY WITH e12 Clear, CanDle TYPe (sCreW FITTInG)
raTInG 110-120V~,40W MaXIMUM FOr all laMPs.
*light Bulbs are not covered under warranty*
caution! Bulbs will become very hot; allow at least 10 minuets for bulbs to be cool before touching.
The flame effect on this electric stove heater is created by two 40 watt light bulbs with an e-12 (small) socket
base. Only use this type of light bulb. To service light bulbs, unplug power cord from outlet, locate access
panel on back of stove. remove screws and panel. light bulbs may come loose or may be damaged
during shipping. If flame effect does not work properly, check to be certain that both bulbs are tight and are
in working order. replace light bulbs as needed. replace access panel. Do not operate with out access panel
in place. Do not remove back cover of heater; no serviceable parts.