Paradyne HOTWIRE 8610 DSLAM, Руководство по установке

Страница: 9 / 56

8610-A2-GN20-10 April 2001
iii
About This Guide
Document Purpose and Intended Audience
This guide is written for administrators and technicians who install devices at the
central office (CO) or at a Network Service Provider (NSP) location adjacent to the
CO. It should be used in conjunction with the appropriate Hotwire DSL Card User’s
Guide.
To install the customer premises (CP) portion of the Hotwire 8610 DSLAM, refer to
the appropriate Hotwire Remote Termination Unit (RTU) Customer Premises
Installation Instructions and Hotwire POTS Splitter Customer Premises Installation
Instructions.
Document Summary
Section Description
Chapter 1,
Introduction
Provides general information about what types of cards
can be used in the Hotwire 8610 DSLAM and DSLAM
features.
Chapter 2,
Installation
Describes what is supplied with the Hotwire 8610
DSLAM, how to install it, and how to install cards into the
chassis.
Chapter 3,
Cabling
Describes how to install various cables used by the
Hotwire 8610 DSLAM and its cards.
Chapter 4, Troubleshooting Lists suggested solutions to possible DSLAM problems
and describes the DSLAM LEDs.
Appendix A, Pinouts Lists suggested solutions to possible DSLAM problems
and describes the DSLAM LEDs.
Appendix B, Technical
Specifications
Lists Technical Specifications.
Glossary
Defines terms and acronyms used in this document.
Index Lists key terms, concepts, and sections in alphabetical
order.