Paradyne FrameSaver SLV 9124, Техническое описание

Страница: 223 / 346

Operation and Maintenance
10-11
9124-A2-GH30-00 June 1999 - Preliminary
Table 10-4. Device Messages (6 of 6)
Message What To Do What It Indicates
User Interface Idle Previously active session is
now closed/ended, and
access via the COM port or
modem port is now
available.
Previously active session is
now closed/ended, and
access via the COM port is
now available.
Log onto the FrameSaver unit.
Session has been ended
due to timeout. No action needed.
Value Out of Range CIR entered for the DLCI is
a number greater than the
maximum allowed. Enter a valid CIR ( 0 – 1536000 ).
Excess Burst Size entered
for the DLCI is a number
greater than the maximum
allowed. Enter a valid Excess Burst Size
( 0 – 1536000 ).
DLCI Number entered is
less than 16 or greater than
1007. Enter a valid number
(16 – 1007 ).
Status Information
Status information is useful when monitoring the FrameSaver unit. Use the Status
menu to display information concerning:
H
System and Test Status Messages – Health and Status, Self-Test Results,
Test Status (see page 10-12)
H
Network LMI Reported DLCIs Status – DLCIs, Status, and CIR (Kbps) (see
page 10-20)
H
PVC Connection Status – Source and Destination Links, DLCIs, EDLCIs, and
connection status (see page 10-21)
H
Time Slot Assignment Status (see page 10-22)
NOTE:
Status messages contained in the following sections are in
alphabetical order.