manualshive.com logo in svg

Paradyne FrameSaver FLEX 9123, Руководство пользователя

Поделиться
Скачать
Paradyne FrameSaver FLEX 9123 Скачать руководство пользователя страница 193

7. Setting Up OpenLane for FrameSaver Devices and Activating SLV Capability

9123-A2-GB20-20

August 2001

7-9

Checking the Status of Scheduled Activations

You can check the status of scheduled activations or cancel activations at any time 
prior to the activations taking place by selecting 

View/Abort scheduled task 

status

 from the Firmware/Feature Maintenance menu. You can select all tasks, 

or select tasks by model, device name, or IP address. When you click on the 
prompt below the 

Select tasks

 table, the table in the lower frame lists all the 

devices in the selected category scheduled for activation.

See the OpenLane SLM system’s online Help for additional information.

Cancelling Scheduled Activations

To cancel scheduled activations, select 

View/Abort scheduled task 

status

 from the Firmware/Feature Maintenance menu, select the desired tasks, 

and click on the prompt to display the FrameSaver devices scheduled for 
activation. 

Click on the box in the Abort column to select the FrameSaver devices that will not 
be activated, then click on the prompt under 

Abort verifications/ 

activations

 to verify your selections, and Apply. Activations for the selected 

devices will be cancelled.

See the OpenLane SLM system’s online Help for additional information.

Accessing and Printing the Certificate Summary Report

The Certificate Summary Report provides information about the Activation 
Certificate and the activated devices. Select 

Generate certificate summary 

report

 from the Firmware/Feature Maintenance menu.

The report lists all Activation Certificates in your OpenLane SLM system and all 
the FrameSaver devices activated using each certificate.

„

Activation Certificate information includes the model, feature, the number of 
activations ordered, the number of activations still covered by the certificate, 
and the date the certificate was ordered.

„

Device activation information includes the device’s name, IP address, its 
location, model, serial number, and the date the device was activated.

We recommend that you print and save this report. However, before printing 
change the orientation of the report to Landscape so no information is truncated.

See the OpenLane SLM system’s online Help for additional information.

Содержание FrameSaver FLEX 9123

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды